Sulfuric Acid Storage Plastic Tank is suitable for molding large and extra-large parts. In most plastic molding processes, plastics and molds are under relatively high pressure during the molding process. For example, injection molding and compression molds are widely used. Therefore, when using these molding processes to produce large plastic parts, not only must a mold that can withstand a lot of pressure be used, making the mold heavy and complicated, but also the plastic molding equipment must be designed and manufactured. It is very firm, and the processing and manufacturing difficulty of the machine mold increases accordingly, and the cost increases.
On the contrary, the anti-corrosion storage tank only requires the strength of the frame to support the weight of the material, the mold and the frame itself, as well as the closing force to prevent the leakage of the material, because of the rotational molding process, even if the large and extra-large plastic parts are rotomolded. , anti-corrosion storage tanks, etc. also do not need to use very bulky equipment and molds, the processing and manufacturing of machine molds is very convenient, the manufacturing cycle is short, and the cost is low. Sulfuric Acid Storage Plastic Tank In theory, there is almost no upper limit on the size of the parts formed by the rotational molding process. But it is easily limited by production conditions and road transportation. It is impossible to produce such a large plastic container, such as by spit molding, without very expensive and huge blow molding equipment.
Sulfuric Acid Storage Plastic Tank is suitable for the production of multi-variety and small-batch plastic products. Since the rotomolding mold is not affected by external force, the mold is simple, inexpensive and convenient to manufacture. In addition, the rotational molding equipment also has greater mobility. A rotational molding machine can not only install a large mold, but also arrange multiple small chess sets; it can not only mold parts of different sizes, but also can simultaneously Products with very different molding sizes and shapes can be rotomolded at the same time as long as the raw materials used in the rotomolding products are the same and the thickness of the products is the same. Therefore, the rotomolding process of anti-corrosion storage tanks has greater flexibility than other molding methods. . Rotational molding can easily change the color of the product.